Custom High Polishing,high Polishing Manufacturers

Factors affecting the quality of die polishing Dec 11, 2018
Since mechanical polishing is mainly completed manually, polishing technology is still the main reason affecting the quality of polishing.In addition, it is also related to mold material, surface condition before polishing, heat treatment process and so on. High quality steel is the prerequisite to obtain good polishing quality, if the surface hardness of steel is uneven or there are differences i...
- Die Polishing
- Mold Material
- Polishing Process
Importance of adjusting the plastic injection mold temperature Mar 29, 2019
In the injection mold industry, the design of the structure for plastic products is very important, but if the temperature of the injection mold is not reasonable, no quality products will be produced, especially in the production of POM (polyoxymethylene), PA (nylon). When do PBT and PET (polyester) material, the mold temperature has a great influence on the plastic part. After reasonable t...
- injection molded product
- high precision injection
- plastic mold cooling
Plastic Mold Manufacturing is Importance as Well Product Design Apr 12, 2019
When trying to develop products or new products, don't just focus on product design, neglect plastic mold manufacturing. Some users tend to focus only on product development and development, ignoring communication with plastic mold manufacturers. After initial determination of the product design plan, there are two advantages of contacting the mold manufacturer ahead of time. 1. You can ensu...
- plastic mold manufacturing
- high quality plastic mold
- mold maker
The program control of injection speed Apr 26, 2019
The program control of the injection speed is to divide the injection stroke of the screw into 3 to 4 stages, and each of the stages uses an appropriate injection speed. For example, when the molten plastic just starts to pass through the gate, the injection speed is slowed down, and during the filling process, high-speed injection is used, and the speed is slowed down at the end of filling. With ...
Purpose of mold polishing May 24, 2019
Polishing is an important process in the plastic mold making process. With the increasing application of plastic products, the appearance quality of plastic products is getting higher and higher, so the surface polishing quality of plastic mold cavities should be improved accordingly. Molds with specular and high-gloss surfaces have higher requirements on the surface roughness of the mold and ther...
- plastic products
- subsequent injection molding
- plastic mold polishing
What to consider when designing the plastic mold? Jul 19, 2019
There are some points that should be noticed when plastic mould design: 1.The draft angle should be designed to be more than one degree. 2. It is suitable to select the direction of the projection surface of the plastic part as the direction of forming pressure, which is convenient for the material to fill the cavity, but it is not suitable for the part with high dimensional accuracy and the axis ...
- plastic mould design
- pre-hardened plastic mould
- high polishing mold
Bank Marks in Mirror-polishing Mould Jul 26, 2019
It is not easy to finish a set of high precision mould of mirror polishing. During polishing, the issues of smoothness of the mould may occur. There are some phenomenas such as graining, orange peel, ripples and bank marks on the mould surface. Today, let's talk about bank marks. Usually, there are two main reasons causing bank marks when mirror polishing the moulds. 1. It is due to the uneven met...
- mirror polishing
- high precision mould
- mould steel
What is the push rod demoulding ? Sep 02, 2019
During the production of injection, some products are not easy to demould. Therefore, there is a push-rod release mechanism at the time of mold design. The push rod demoulding device is simple structure, convenient manufacture and replacement, small sliding resistance and flexible demoulding position, and is the most commonly used structural form in the demolding mechanism. Howev...
- gas assistant molds
- unscrewing molds
- high cavitation injection molds

1 2

A total of 2 pages

Categories

Blog

New Blog

Tags

Search