Now there are many plastic pipe mold factories, and the steel materials used for pipe mold are also different, but a real professional plastic pipe mold manufacturer can know how to make their own plastic pipe mold more popular with customers. With more than 20 years of pipe mould manufacturing experience, we can produce high quality moulds from direct, three-way, four-way, elbow, plug, joint and reducing pipe fittings.

Different mold manufacturers use different mold steel, the quality is good and bad. We suggest that if the general amount is large, the core, cavity and slider are 718H, 3CR13, NAK80, S136, etc., such a mold can be made at least 700-1 million times. If the amount of small die frame using core, cavity and slider using P20, 2738, 2316, so that the product can hit 500,000 times. In addition, the mold steel is strongly recommended to use 3 times of treatment, the first quenching and tempering, the second vacuum 42-46 degree hardness treatment, the third temperature 48 hours tempering. The most important thing is to control the distance of each piece of steel in the furnace, so that each piece of treatment is kept even, so that local too hard caused by cracking.

For pipe fitting molds, many manufacturers can do it. But just because you can do it doesn't mean you'll do it well. No matter what things, only professional can make the most trusted by customers, as a professional pipe fitting mold manufacturer, Green Vitality Industry Co., Ltd has constantly summarized and explored in years of production experience, and now has a set of pipe fitting mold design concept and manufacturing process. In the design, every detail is made through careful analysis and certification. In the workmanship, it is also put in the hands of the manufacturing master who has many years of manufacturing pipe fitting molds. Always adhere to do the most professional things, give customers the most worry free service.