Since mechanical polishing is mainly completed manually, polishing technology is still the main reason affecting the quality of polishing.In addition, it is also related to mold material, surface condition before polishing, heat treatment process and so on. High quality steel is the prerequisite to obtain good polishing quality, if the surface hardness of steel is uneven or there are differences i...

Polishing is an important process in the plastic mold making process. With the increasing application of plastic products, the appearance quality of plastic products is getting higher and higher, so the surface polishing quality of plastic mold cavities should be improved accordingly. Molds with specular and high-gloss surfaces have higher requirements on the surface roughness of the mold and ther...

There are some points that should be noticed when plastic mould design: 1.The draft angle should be designed to be more than one degree. 2. It is suitable to select the direction of the projection surface of the plastic part as the direction of forming pressure, which is convenient for the material to fill the cavity, but it is not suitable for the part with high dimensional accuracy and the axis ...

It is not easy to finish a set of high precision mould of mirror polishing. During polishing, the issues of smoothness of the mould may occur. There are some phenomenas such as graining, orange peel, ripples and bank marks on the mould surface. Today, let's talk about bank marks. Usually, there are two main reasons causing bank marks when mirror polishing the moulds. 1. It is due to the uneven met...

Mold polishing has two purposes; one is to increase the smoothness of the mold, so that the surface of the product from the mold is smooth and beautiful, and the other is to make the mold easy to release, so that the plastic will not be stuck on the mold and cannot be taken off. Mastering a reasonable polishing method can improve the quality and service life of the mold, thereby improving product ...

How to do the mirror polishing of the plastic mold? Mirror polishing of plastic molds is generally from relatively coarse sand paper to fine sand paper, and then from coarse to fine polishing method by using different models of diamond grinding and polishing paste, and then from coarse to fine sand paper step by step.After the above steps, you need to use diamond polishing paste from rough to fine...