Custom Precision Molds,Precision Molds Manufacturers

Solution for surface burning of mold Nov 16, 2018
Injection molds are often burned for some reason during production.Depending on the cause of the burn, such as machine, mold, or molding conditions, there are different solution. 1. Mechanical reasons: overheating of the cylinder due to abnormal conditions; or stagnation of the resin due to the nozzle and screw thread.At this time, the nozzle, screw and barrel should be cleaned. 2. The cause of th...
- Injection molds
- mold solution
- surface burning
Mold Introduction Dec 14, 2018
Mold Definition and Classification Mold is called “Mother of Industry”. It is a processing tool that processes raw materials and gives raw materials a complete configuration and precise size. It is mainly used for efficient and high-volume production of related parts in industrial products. The development of the mold industry has always been valued by the state. According to the National Developm...
- Precision molds
- stamping mold
- die-casting
Importance of adjusting the plastic injection mold temperature Mar 29, 2019
In the injection mold industry, the design of the structure for plastic products is very important, but if the temperature of the injection mold is not reasonable, no quality products will be produced, especially in the production of POM (polyoxymethylene), PA (nylon). When do PBT and PET (polyester) material, the mold temperature has a great influence on the plastic part. After reasonable t...
- injection molded product
- high precision injection
- plastic mold cooling
The Precision Of The Mold Will Be Higher And Higher Apr 04, 2019
With the continuous development of the economy, people's living standards are increasing, and the demand for spiritual and material culture is becoming higher and higher. This demand has also led to the continuous development and innovation of the home industry. The industry has a growing demand for home hardware, and the household hardware industry has shown a different change. The mold industry ...
How to choose the mold steel for mirror polishing? May 20, 2019
To make high quality mirror polishing on mold (cavity and core inserts, same as below), the requirement of mold surface polishing of mold is high, because this is the most important loop of mold manufacturing. The surface with roughness and corrugated grain is an abnormal phenomena in mirror polishing of molds. Generally, it is the the mold steel material, the polishing method, or the inject...
- mobile phone molds manufacturing
- injection molding
- electronic moulds
Bank Marks in Mirror-polishing Mould Jul 26, 2019
It is not easy to finish a set of high precision mould of mirror polishing. During polishing, the issues of smoothness of the mould may occur. There are some phenomenas such as graining, orange peel, ripples and bank marks on the mould surface. Today, let's talk about bank marks. Usually, there are two main reasons causing bank marks when mirror polishing the moulds. 1. It is due to the uneven met...
- mirror polishing
- high precision mould
- mould steel
What is the push rod demoulding ? Sep 02, 2019
During the production of injection, some products are not easy to demould. Therefore, there is a push-rod release mechanism at the time of mold design. The push rod demoulding device is simple structure, convenient manufacture and replacement, small sliding resistance and flexible demoulding position, and is the most commonly used structural form in the demolding mechanism. Howev...
- gas assistant molds
- unscrewing molds
- high cavitation injection molds
The common problems in injection molding of PC injection molds Nov 01, 2019
Everyone in the mold industry knows that pc injection molds will encounter some quality problems in one or the other during injection molding. Why do the same set of molds have different effects on products with different materials? This is due to the difference in the performance of the PC injection mold and the plastic material used for the injection molding. The pc material is relatively ...
- pc injection molds
- PC+ABS plastic molding
- Hot nozzle mould

1 2

A total of 2 pages

Categories

Blog

New Blog

Tags

Search