Custom Mould Cooling,mould Cooling Manufacturers

The main factors affecting mold life May 20, 2019
The main factors affecting mold life. 1. The structure of the mold -effective mold structure helps to improve the load carrying capacity of the mold and reduce the mechanical load on the mold; 2. The material of the mold - should be selected according to the size of the production batch of the product parts; The hardened mold will bring more shots and meet the high require for the mold treat...
- Hardened Mold
- Mold Designing and Machining
- Plastic Components Moulding
The meaning of molding May 20, 2019
Molding is a high quality, high efficient, low loss, strong adaptation manufacture technology. it's a valuable wealth in the society. Cause of the modernization of mold production technology, nowdays , mold has been widely used in the production of electric motors and electrical products, electronic computer products, instruments, household appliances and office equipment, automobiles, ordnance, g...
- Mold design
- Plastic mould
- Injection mold
How to choose the mold steel for mirror polishing? May 20, 2019
To make high quality mirror polishing on mold (cavity and core inserts, same as below), the requirement of mold surface polishing of mold is high, because this is the most important loop of mold manufacturing. The surface with roughness and corrugated grain is an abnormal phenomena in mirror polishing of molds. Generally, it is the the mold steel material, the polishing method, or the inject...
- mobile phone molds manufacturing
- injection molding
- electronic moulds
What is the most important during designing a mould ? May 27, 2019
The most important point is structure , If the structure can be simplified as much as possible, but the quality of the mold must be guaranteed, the company will earn the maximum profit from it . When we received a product , the first question is find out the biggest parting surface , Roughly determine the cavity and the core , then , To Analyze the construction of cavity and core , insert , ...
- Mould design
- mould processing
- plastic injection molding
Correct gate type and location for plastic mold Jun 10, 2019
When we design a mould , to chosing the gate type and location is very important. It will caused processing problem , even the quanlity of plastic products. Mould design engineer shouldn't only calculate for plastic products , but also should especially pay attention to the design for gate. They must chose the correct gate type , the numbers of gate and location . The gate type a...
Short Shot Injection Molding Jun 14, 2019
Insufficient injection is also called short shot. Short shot is the phenomenon of partly incomplete at the end of the material flow, or a part of the cavity filled with dissatisfaction, especially the thin wall area or the end area of the the runner when injection molding. When the melt is cooled down without filling the mold cavity, or the melt does not fill completely after running into the cavi...
- short shot injection molding
- mold cavity
- mould temperature
What to consider when designing the plastic mold? Jul 19, 2019
There are some points that should be noticed when plastic mould design: 1.The draft angle should be designed to be more than one degree. 2. It is suitable to select the direction of the projection surface of the plastic part as the direction of forming pressure, which is convenient for the material to fill the cavity, but it is not suitable for the part with high dimensional accuracy and the axis ...
- plastic mould design
- pre-hardened plastic mould
- high polishing mold
The short shot checkpoints Jun 28, 2019
The short shot checkpoints As mentioned that, when the melt is cooled down without filling the mold cavity, or the melt does not fill completely after running into the cavity, it is called the short shot injection molding. We analyse the reasons of short shot. So today let’s discuss how to improve the insufficient injection. Here lists short shot checkpoints: 1) Improper control of process conditi...
- mould temperature
- mold cavity
- short shot injection molding

1 2 3 4 5 6 ... 12

A total of 12 pages

Categories

Blog

New Blog

Tags

Search