Custom Mold Injection Parts,mold Injection Parts Manufacturers

Injection mold gate type and selection-2 Aug 14, 2020
2.1 Unrestricted gate. Unrestricted gate is also called straight gate. Its characteristic is that the plastic melt flows directly into the cavity, the pressure loss is small, the feeding speed is fast and the molding is easier, and it is suitable for all kinds of plastics. It has the advantages of good transmission pressure, strong pressure maintaining and shrinking effect, simple and compact mold...
- mold Filling
- injection molding machine
- plastic mold Filling
Commonly used materials and attention in CNC prototype processing Aug 21, 2020
CNC processing is a very common processing method for prototype parts. The commonly used materials are: ABS, POM, PMMA (Acrylic), Nylon, PC, PP, PA, BT, PVC, etc. Aluminum alloy, copper, etc. After the workpiece is clamped, the digital control system can control the machine tool to automatically select and change cutter according to different procedures, automatically change the spindle speed, fee...
- prototype parts
- CNC prototype
- CNC machining part
Injection mold gate type and selection-3 Aug 21, 2020
2.2 Limit the gate. The cavity and the runner are connected by a channel with a short distance at one end and a small section. This channel is called a restrictive gate, which limits the thickness of the gate and rapid solidification. The main types of restriction gates are: 2.2.1 Point gate. Point gate is a round gate with extremely small cross-sectional size. The characteristics of the point gat...
- mold Filling
- injection molding machine
- plastic mold Filling
What are the precautions for mold polishing? Sep 04, 2020
Mold polishing has two purposes; one is to increase the smoothness of the mold, so that the surface of the product from the mold is smooth and beautiful, and the other is to make the mold easy to release, so that the plastic will not be stuck on the mold and cannot be taken off. Mastering a reasonable polishing method can improve the quality and service life of the mold, thereby improving product ...
- mirror polished parts
- high polishing
- mold polishing
Injection mold gate type and selection-4 Sep 04, 2020
2.2.3 Side gate The side gate is also called the edge gate, which is generally opened on the parting surface and feeds from the outer side of the cavity (plastic part). The side gate is a typical rectangular cross-section gate, which can easily adjust the shear rate and gate closing time during mold filling, so it is also called a standard gate. The side gate is characterized by simple gate cross-...
- mold Filling
- injection molding machine
- plastic mold Filling
Injection mold gate type and selection-5 Sep 21, 2020
.2.5 Fan gate Fan-shaped gate is a gradually expanded gate, which is a variant of side gate, and used to form large-width plate-shaped plastic parts. The gate gradually widens along the feed direction, and the thickness is gradually reduced to the thinnest. The plastic melt is uniformly distributed in the width direction, which can reduce the internal stress of the plastic part and reduce th...
- mold Filling
- injection molding machine
- plastic mold Filling
What is double shot mold? Sep 30, 2020
Double Injection Mold is also called Two Color Mold. That's two different materials or two color materials injected in one injection machine, injected by twice, but the product only comes out one shot from the mold. This mold technology is called double material injection, usually finished by one set mold, and it needs special two color injection molding machine to produce the products. Double inj...
- double mold
- two color mold
- 2k mold
Injection mold wants to do well: must grasp five injection schedules Sep 30, 2020
On the premise of ensuring product quality, the shorter the cycle time is, the higher the cycle time. The cycle time includes the following items: injection time, pressure holding time, melting time, cooling time, ejection time, mold clamping low pressure time, and even more The time factor is also related to mold opening and clamping, and the speed of ejection. 1. Injection time Including the hol...
- injection mold
- injection molding
- injection supplier

1 ... 22 23 24 25 26 27 28 29

A total of 29 pages

Categories

Blog

New Blog

Tags

Search