Custom Injection Temperature,injection Temperature Manufacturers

How to Choose a Good Chinese Injection Mold Company? Nov 08, 2018
It is very important to choose a good mold manufacturer, because they not only can provide you with satisfactory molds, but also can make the after-sales easy. When the customer encounters a production problem, they can also consult these professional mplasold manufacturer, they will provide good advice to customers in many aspects such as design, production, etc., can save costs, improve eff...
Injection Molding and Temperature Nov 08, 2018
Based on the grade you are using, checking the coefficient of linear thermal expansion. It will depend on which stage your weld lines are formed. If you have a high molecular weight material and the weld area is during the initial stages of filling, the weld strength may be good in both climates. If your weld area is towards the end of filling, a grade with higher elongation property m...
- Injection Molding
- assembly
- injection temperature
Automotive Plastic Injection Moulding Nov 16, 2018
For more than 20 years, Green Vitality Mold has been providing high quality moulds and superior injection moulding services, especially working for the automotive small part sector. We are always trying to find new and innovative solutions to meet the ever-changing demands for the auto industry. We can produce a wide range of parts and small components for the automotive sector. These include item...
- plastic injection moulding
- automotive part
- auto industry
Test questions of plastic injection molds (1) Nov 16, 2018
The test is an essential part of the new mold before injection molding, or when the machine is replaced with other molds. The quality of the test results will directly affect whether the subsequent production of the factory is smooth or not. So, what are the common problems in the mold test? Today we will take a detailed inventory for a reference. 1.Short molding: mainly due to insufficient feedin...
- Injection mold
- mold test
- plastic parts
Solution for surface burning of mold Nov 16, 2018
Injection molds are often burned for some reason during production.Depending on the cause of the burn, such as machine, mold, or molding conditions, there are different solution. 1. Mechanical reasons: overheating of the cylinder due to abnormal conditions; or stagnation of the resin due to the nozzle and screw thread.At this time, the nozzle, screw and barrel should be cleaned. 2. The cause of th...
- Injection molds
- mold solution
- surface burning
The solution of bubble issue during injection molding process Nov 23, 2018
According to the causes of bubbles, the countermeasures are as follows: (1) When the wall thickness of the product is large, the cooling speed of its external surface is faster than that of the central plastic part. Therefore, as the cooling goes on, the resin at the central part shrinks and expands towards the surface, resulting in insufficient filling at the central part. This condition is calle...
- Plastic Mold
- Injection molding
- plastic parts
plastic injection molding, plastic surface, plastic mold. Nov 30, 2018
The parting surface is the joint surface of the mold for taking out the product in the process of injection molding. An important factor that decides the structural form of the mold, it is related to the overall structure of the mold, the design of the pouring system, the demoulding of the plastic parts and the manufacturing process of the mold. Selection principle of parting surface: A. The maxim...
- plastic injection molding
- plastic mold
- plastic surface
Basic Design Principles for Gas Assisted Injection Mold(1) Dec 14, 2018
Today we are going to discuss basic design principles for gas assisted injection mold 1. When designing, first consider which wall thickness needs to be hollowed out, which surface shrinkage needs to be eliminated, and then consider how to connect these parts into the airway. 2. Large structural parts: full thinning, partial thickening for the airway. 3. The airway should be evenly distributed to ...
- gas assisted injection mold
- gas injection
- plastic gas assisted mold

1 2 3 ... 21

A total of 21 pages

Categories

Blog

New Blog

Tags

Search