Custom Auto Industry,auto Industry Manufacturers

Automotive Plastic Injection Moulding Nov 16, 2018
For more than 20 years, Green Vitality Mold has been providing high quality moulds and superior injection moulding services, especially working for the automotive small part sector. We are always trying to find new and innovative solutions to meet the ever-changing demands for the auto industry. We can produce a wide range of parts and small components for the automotive sector. These include item...
- plastic injection moulding
- automotive part
- auto industry
Attentions to Car Lamp Mold Polishing Jun 14, 2019
We have done several plastic car lamp molds, polish is very important procedure for this kind of molds. so today we are going to discuss the attentions of plastic auto parts mold polish. 1. For the position of parting line, it should be carefully polished, and at the same time ensure that the appearance of the product. Also, the position of the buckle should also be smooth and smooth, ...
- plastic auto parts mold
- plastic lamp mold
- car lamp products
Actual Case Analysis of Poor Shrinkage (1) Jul 26, 2019
Today we are going to discuss one case for the sink mark, we will show what we would do when we face the sink mark problem. 1. Basic information: PE, Holder (car parts) shrinks poorly and snakes are bad. 2. Description: The plan to increase the injection pressure has not been solved. In order to make the resin pressure fully function, the gate thickness is increased and the sink mark is improved. ...
- injection mould design
- injection molding parts
- plastic auto molding
What is the difference between TPU extrusion and injection molding? Aug 05, 2019
Extrusion, also known as extrusion molding or extrusion, is also called extrusion in rubber processing. It refers to a processing method in which the material passes through the action between the barrel and the screw of the extruder, is plasticized while being pushed forward by the screw, and continuously passes through the machine head to make various cross-section products or semi-products. Inj...
The Composition of injection mold May 22, 2020
The plastic injection mold is consist of several steel plates with different components. Basicly it's divided into below parts: A Forming unit（cavity，core） B Locating device（guide pin，guide bushing） C Fixed device（top clamp plate, clamp slot） D Cooling system（water line, water tube） E Constant temperature system（heating tube，heating element） F Runner system（sprue nozzle，flow channel slot，runner ho...
Working principle of injection molding machine May 30, 2020
The basic working principle of the injection machine can be understood as that after the plastic raw materials are uniformly plasticized in the barrel, they are injected, molded by flow, filled with pressure, and cooled to form injection products. Under the action of the screw, the granular plastic stored in the hopper continuously moves along the screw groove. Due to the comb...
Why the plastic parts have mixed color? Jul 23, 2020
Sometimes when we make injection parts, we can find some parts have mixed color, why this happens? The reason may be as below: 1. plastic material is mixed with master color or toner. 2. plastic material was decomposed and carbonized. 3. it was polluted when adding material or changing material 4. the material itself is not pure, has mixed material other material Green Vitality has rich experience...
plastic injection moulds for automotive interior and exterior trim Jun 18, 2021
plastic injection moulds for automotive interior and exterior trim With the arrival of electric vehicle, driverless technology and new energy vehicle era, automobile lightweight design will be the inevitable trend of automobile design, and it is inevitable that plastics can make automobile lightweight design into reality. Plastics are widely used in automobile industry, which will bring a new...
- automobile injection mold
- plastic mould
- injection mould

1 2

A total of 2 pages

Categories

Blog

New Blog

Tags

Search