Custom Ultrasonic Welding Machine,ultrasonic Welding Machine Manufacturers

Injection mold gate type and selection-3 Aug 21, 2020
2.2 Limit the gate. The cavity and the runner are connected by a channel with a short distance at one end and a small section. This channel is called a restrictive gate, which limits the thickness of the gate and rapid solidification. The main types of restriction gates are: 2.2.1 Point gate. Point gate is a round gate with extremely small cross-sectional size. The characteristics of the point gat...
- mold Filling
- injection molding machine
- plastic mold Filling
How many you know about the ultrasonic plastic welding ? Sep 21, 2020
How many you know about the ultrasonic plastic welding? Plastic welding refers to the method of heating the contact surface of two plastic parts to melt at the same time, so that they are combined into a whole connection method, only applicable to the thermoplastic joint welding, we can use electrode or not use electrode. When using the welding rod, the end face of the welding end shall be made in...
- ultrasonic welding
- ultrasonic welding machine
- welding machine
Injection mold gate type and selection-4 Sep 04, 2020
2.2.3 Side gate The side gate is also called the edge gate, which is generally opened on the parting surface and feeds from the outer side of the cavity (plastic part). The side gate is a typical rectangular cross-section gate, which can easily adjust the shear rate and gate closing time during mold filling, so it is also called a standard gate. The side gate is characterized by simple gate cross-...
- mold Filling
- injection molding machine
- plastic mold Filling
Injection mold gate type and selection-5 Sep 21, 2020
.2.5 Fan gate Fan-shaped gate is a gradually expanded gate, which is a variant of side gate, and used to form large-width plate-shaped plastic parts. The gate gradually widens along the feed direction, and the thickness is gradually reduced to the thinnest. The plastic melt is uniformly distributed in the width direction, which can reduce the internal stress of the plastic part and reduce th...
- mold Filling
- injection molding machine
- plastic mold Filling

1 ... 3 4 5

A total of 5 pages

Categories

Blog

New Blog

Tags

Search