Custom Mold Engineering,mold Engineering Manufacturers

Introduction of methods to improve the performance of mold Jan 04, 2019
In addition to the strength and toughness of the mold, its surface performance is critical to the working performance and service life of the mold. Improvement that rely solely on raw materials are very limited and uneconomic.Surface treatment can often get twice the result with half the effort, which is the reason why surface treatment technology has been developed rapidly. Mold surface treatment...
- plastic injection molding
- plastic part
- mold manufacturer
Venting System Design for Plastic Injection Mold Jan 04, 2019
How should the plastic mold venting system be designed? Mold design has always been an indispensable part of the machinery industry. Plastic molds are tools used in the plastics processing industry to match plastic molding machines, giving plastic products a complete configuration and precise dimensions. Due to the variety of plastics and processing methods, the structure of plastic molding machin...
- Venting system for mold
- mold clamping
- mold injection parts
Thirteen Suggestions for Maintenance of Injection Molds (1) Jan 14, 2019
Compared with other molds, the plastic injection mold is more complicated and precise, and the requirements for operation and maintenance of the product are higher. Therefore, in the whole production process, correct operation and meticulous maintenance have great significance to normal production of the enterprise and enterprise profit improving. 1. We need choose the appropriate injection machin...
- plastic injection mold
- mold injection machine
- plastic mold maintenance
How to control the color difference of injection parts? Jan 14, 2019
Color difference is a common defect in injection moulding. There are many factors affecting the color difference, such as raw resin, color masterbatch (or color powder), mixture of color masterbatch and raw material, injection molding process, injection moulding machine, mould and so on. Because it involves a wide range of aspects, it is recognized as one of the difficult technologies to master th...
Why the Mold Inserts are so Importance to Mould Manufacturering? Jan 14, 2019
The term mold insert is familiar and frequently used in the mold industry. The insert is mainly used for various irregular fittings embedded in irregular molds. The good quality mold insert can be used as a filling template or a fixed template. Space used. In fact, it is to help the mold to repair some defects. Then, why should the mold use the mold insert? Changsha Borun believes that the most ob...
The principles for standardized production of injection molds（2） Jan 18, 2019
Then pay attention to the previous issue, high quality molds should also pay attention to: 1. The thimble adopts the HASCO or DME standard, which is determined by the mold technical requirements determined by the BOM or other official notice. 2. Processing water apron ("O" ring) groove, need to reserve a gap of 0.25mm on one side, the general apron should be pre-pressed 0.5-0.8mm. If you do not pa...
- Mold BOM
- mold engineering
- mold panel
2 points for PC injection molding product Jan 18, 2019
Transparent components have their own special features and functions. Polycarbonate injection molding will inevitably be used in auto parts.In the process of injection molding, we often encounter some thick wall transparent injection parts.For performance reasons, these plastic parts are made from PC machinery. When the average wall thickness exceeds 6mm and the maximum wall thickness exceeds 12mm...
Working principle of injection mold Jan 18, 2019
Injection mould is a tool for producing plastic products. It is also the tool that gives plastic products complete structure and precise size. Injection molding is a process used in the mass production of complex shaped parts. Specifically refers to the heat melts the material by high pressure into the mold cavity, after cooling curing, forming products. The injection mold is composed of moving mo...
- plastic injection molding
- custom plastic part
- injection mould

1 2 3 4 5 6 ... 28

A total of 28 pages

Categories

Blog

New Blog

Tags

Search