Blog | Custom Injection Molding,Plastic Mold Maker

What is the Die casting Mold? Apr 30, 2020
Die casting mold is a method of casting liquid die stamping, a process completed in a special die casting die-stamping machine. Its basic process is as below: First, the metal liquid filled into the mold cavity with low speed or high speed, the mold has a movable cavity surface, Then it is stamped as the metal liquid cools, Finally, not only eliminate the defects of the cav...
- Die Casting
- Casting Mold
- Stamping mold
It is not difficult to understand the principle of core pulling design of the curved pipe mold. Apr 26, 2020
Pipe type products are also relatively common, and many mold designers do not understand the principle of arc core pulling, let me share with you. Due to the relatively long stroke of arc core pulling, oil cylinder core pulling is required, as shown in the figure below For arc core pulling, the slider insert needs to be divided into several pieces, and the core is pulled along the arc of the produ...
- pipe mold
- oil cylinder core pulling
- mold design
Common injection molding product defects and solutions-8 Apr 26, 2020
Cell the reason: 1. Holding pressure is too low. 2. The holding time is too short. 3. The injection speed is too fast. 5. The back pressure is too low. 6. The mold temperature is too low. 7. The product is too thick. 8. Melt temperature is too high. Solution: 1. Increase the back pressure of the melt. 2. Reduce the reverse rope. 3. Increase holding pressure. 4. Increase holding time. 5. Reduce the...
- mold Filling
- injection molding defects
- plastic mold Filling
The inner undercut of the product cannot be used as a lifter, what mold structure should be used? Apr 22, 2020
We all know that products have undercut, usually, the inner undercut of the product is generally released by a lifter, and the outer undercut of the product is released by a slider. When the inner undercut of the product cannot be used as a lifter, what structure do we use? As shown below: Encounter this type of product, can not do lifter, can only consider the inner slider core pulling. The...
- plastic injection mold
- injection mold design
- undercut problem
Plastic hot runner mould discussion Apr 17, 2020
The hot runner mold has the following advantages: 1. Reduce waste ratio of parts and improve part quality; 2. Reduce product deformation and improve product appearance; 3. Improve productivity and achieve automated production; 4. Expand and improve the consistency and balance of products; 4. Shorten the molding cycle of parts; 5. Very suitable for the use of multi-cavity molds; Although comp...
- hot runner mold
- cold runner mold
- multi-cavity mold
How many types does Nylon have? What's the difference between nylon and modified nylon? Apr 17, 2020
Nylon is as the most important type in engineering plastic material, it has a very strong vitality and long history. Today we will talk about Nylon and Modified Nylon. As we know PA66 and PA6 are the most two common Nylone material. But except PA66 and PA6, nylon has many other types, like PA610, PA11, PA1010, PA1313, PA1414, PA612, PA9T, PA6T, PA12, PA46, PA10T. Nylon has a very excellent mechani...
- Nylone and Modified Nylon, PA6
- Reinforced PA66
- PA66+30GF
What is the Blowing mold? Apr 17, 2020
Blowing mold is a kind of molding mold to produce hollow thermoplastic parts. The well-known products are bottle, bucket, jar, box, food container and so on. Large blow molding containers are used to pack chemicals, lubricants and bulk materials. Other blow molding products include balls, bellows and toys. And it is also used for Auto parts and Machinery and furniture manuf...
Common injection molding product defects and solutions-7 Apr 10, 2020
Weld line Causes: 1. The product design is unreasonable. 2. The injection speed is too slow. 3. Injection pressure is too low. 4. The injection time is too short. 5. The mold surface temperature is too low. 6. Insufficient exhaust. 7. The gate position is unreasonable. 8. The melt temperature is too low. Solutions: 1. Increase the material temperature. 2. Improve injection speed. 3. Increase the m...
- mold Filling
- injection molding machine
- plastic mold Filling
Tips for injection molding of nylon cable ties Apr 10, 2020
1. Pay attention to mold temperature If the lower temperature of the heat-resistant and abrasion-resistant nylon cable ties in the production, the faster the material cooling rate in the mold cavity, so that it can greatly shorten the take-out time of the product and improve the efficiency of the molding operation. However, if the temperature is too low, it will easily cause the appearance of the ...
- cable tie production
- nylon cable tie molding
- plastic cable tie mold
What is the extrusion mold? Mar 27, 2020
Extrusion mold is a kind of molding mold, but its way of molding is extrusion. It is widely used in aluminum shaped structures and also in plastic parts. In the front of the extruder, used to make pipe or profile. In short, a mold is a tool used to form an object. The tool is made up of various parts. Different molds are made up of different parts. It mainly processes product by ...
- Extrusion mold
- Plastic light cover
- plastic part

1 ... 6 7 8 9 10 ... 25

A total of 25 pages

Categories

Blog

New Blog

Tags