Custom Nylon PA Injection Molding,nylon PA Injection Molding Manufacturers

plastic injection molding, plastic surface, plastic mold. Nov 30, 2018
The parting surface is the joint surface of the mold for taking out the product in the process of injection molding. An important factor that decides the structural form of the mold, it is related to the overall structure of the mold, the design of the pouring system, the demoulding of the plastic parts and the manufacturing process of the mold. Selection principle of parting surface: A. The maxim...
- plastic injection molding
- plastic mold
- plastic surface
Ten principles of mold design for P/L (2) Dec 11, 2018
Let’s go on from last article about discussing the principles of mold design for P/L. 6. Good to demoulding The mold release mechanism of the general mold is in the movable mold, so the product should be left in the movable mold as much as possible when selecting the parting surface. Therefore, for some places where it is possible to stick to the fixed mold, we often add a fixed mold assiste...
- movable mold
- plastic mold parting
- mechanical mold
Basic Design Principles for Gas Assisted Injection Mold(1) Dec 14, 2018
Today we are going to discuss basic design principles for gas assisted injection mold 1. When designing, first consider which wall thickness needs to be hollowed out, which surface shrinkage needs to be eliminated, and then consider how to connect these parts into the airway. 2. Large structural parts: full thinning, partial thickening for the airway. 3. The airway should be evenly distributed to ...
- gas assisted injection mold
- gas injection
- plastic gas assisted mold
Basic Design Principles for Gas Assisted Injection Mold(2) Dec 20, 2018
Today we will go on to discuss the basic design principles for gas assisted injection mold 11. Accurate cavity size is very important. 12. The symmetrical cooling of various areas of the product is very important. 13. When using gate inlets, the balance of flow is important for uniform of gas penetration. 14. The exact amount of injection is very important, and the Injection volume error should no...
10 factors that influence the quality of injection mold Dec 20, 2018
Mold manufacturing is a complex process, from the design, processing, assembly, debugging and other steps, to the final actual use. In the whole life cycle, the factors affecting the quality of mold mainly have the following 10 aspects. 1. Mold steel is the decisive factor of mold quality thus the choice of reasonable steel is the top priority. 2. Reasonable mold structure can effectively extend t...
- plastic injection molding
- plastic part
- mold quality
Design and Manufacturing Elements of Blow Molds Dec 26, 2018
The design and manufacture of blow molds with fast cycle times and long life is required for the development of the blow molding industry. The factors that determine the efficiency of the mold are: 1. Material 2. Cooling 3. Venting Material The material from which the mold is made must have high thermal conductivity and sufficient cutting edge strength. Curr...
- design of blow mold
- plastic blow mold
- blow molding manufacture
Surface Treatment on Mold Dec 26, 2018
Surface treatment is widely used in many objects, from traditional industry to high-tech industry, from metal surface to plastic surface. All processes, which are made to change the material surface's physical, mechanical and chemical properties, is called Surface Treatment. A mold surface treatment is processed to improve surface finish of injection molded parts. It makes materials more cor...
- Plastic molding surface
- Mold surface treatment
- Injection molded parts
What is gas-assisted injection molding? Dec 27, 2018
Gas-assisted injection (modeling) molding, also known as gas injection (shot molding) molding, is a new injection molding process. It is one of the most important developments in the injection molding industry since the advent of reciprocating screw injection machines. Gas-assisted injection molding is an extension of injection molding. It is developed on the basis of injection molding technology ...
- Gas-assisted injection
- shot molding
- stamping mold

1 2 3 4 ... 26

A total of 26 pages

Categories

Blog

New Blog

Tags

Search