Custom Injection Parts,injection Parts Manufacturers

A Good Design for Mould Air Venting Groove Jan 04, 2019
There will be some problems like insufficient filling, compressed air burning, high internal stress inside parts, flowing mark and welding line on surface when testing molds or production. To solve or avoid these problems, we will adjust the injection moulding process first, and also consider the mould gate. When it is no problem for the injection moulding process and gate, the main way to solve t...
- Mould air venting slot
- Injection moulding
- Mould Cavity
Thirteen Suggestions for Maintenance of Injection Molds (1) Jan 14, 2019
Compared with other molds, the plastic injection mold is more complicated and precise, and the requirements for operation and maintenance of the product are higher. Therefore, in the whole production process, correct operation and meticulous maintenance have great significance to normal production of the enterprise and enterprise profit improving. 1. We need choose the appropriate injection machin...
- plastic injection mold
- mold injection machine
- plastic mold maintenance
How to control the color difference of injection parts? Jan 14, 2019
Color difference is a common defect in injection moulding. There are many factors affecting the color difference, such as raw resin, color masterbatch (or color powder), mixture of color masterbatch and raw material, injection molding process, injection moulding machine, mould and so on. Because it involves a wide range of aspects, it is recognized as one of the difficult technologies to master th...
Why the Mold Inserts are so Importance to Mould Manufacturering? Jan 14, 2019
The term mold insert is familiar and frequently used in the mold industry. The insert is mainly used for various irregular fittings embedded in irregular molds. The good quality mold insert can be used as a filling template or a fixed template. Space used. In fact, it is to help the mold to repair some defects. Then, why should the mold use the mold insert? Changsha Borun believes that the most ob...
2 points for PC injection molding product Jan 18, 2019
Transparent components have their own special features and functions. Polycarbonate injection molding will inevitably be used in auto parts.In the process of injection molding, we often encounter some thick wall transparent injection parts.For performance reasons, these plastic parts are made from PC machinery. When the average wall thickness exceeds 6mm and the maximum wall thickness exceeds 12mm...
Working principle of injection mold Jan 18, 2019
Injection mould is a tool for producing plastic products. It is also the tool that gives plastic products complete structure and precise size. Injection molding is a process used in the mass production of complex shaped parts. Specifically refers to the heat melts the material by high pressure into the mold cavity, after cooling curing, forming products. The injection mold is composed of moving mo...
- plastic injection molding
- custom plastic part
- injection mould
Application of injection mold Jan 18, 2019
Injection mold is one of the important technology and equipment, production of various industrial products with the rapid development of plastic industry, as well as plastic products in aviation, aerospace, electronics, machinery, shipbuilding and automobile industries, products is becoming more and more high to the requirement of the mould, the traditional mould design method has been unable to a...
- injection molding
- plastic injection mold
- plastic mould
Thirteen Suggestions for Maintenance of Injection Molds (2) Jan 25, 2019
Let's go on to discuss the maintenance of injection molds 6. If the cavity surface has special requirements, and the surface roughness Ra is less than or equal to 0.2cm, absolutely can not be wiped by hand or cotton, It should apply compressed air, or use advanced napkins and high-grade cotton wool to gently rub the alcohol Wipe. 7. The surface of the cavity should be cleaned regularly. The inject...

1 2 3 4 5 ... 22

A total of 22 pages

Categories

Blog

New Blog

Tags

Search