What are the effective measures to reduce mold maintenance

Plastic mold maintenance is actually from the mold itself for very few reasons.
Although it is a very small probability, we also need to pay attention to the root cause of mold maintenance from the source. Then,  Green Vitality Industry Co.,Ltd will talk about effective measures to reduce mold maintenance.

1. Strengthen scientific and reasonable injection molding knowledge training, try not to damage the mold in production, low pressure protection setting.Mold closing speed, clamping force, injection speed, holding pressure, temperature and other parameters are not appropriate these will greatly damage the mold, these are the need to pay great attention to.

2. Production control, glue plugging at glue inlet and iron plugging in hot runner should be avoided.

3. Mold maintenance, thimble card, spring break, drawing dust and edge should be avoided.

4. Wear parts must be prepared in the warehouse in the corresponding quantity, such as: thimble, spring, pipe, guide pillar and so on to uniform specifications, inventory.

5. Work specification for injection molding production personnel.

When the above points are done well, the maintenance of molds can be greatly reduced. Therefore, these points are also the premise of doing a good job of a set of molds. Green Vitality Industry Co.,Ltd will also strive to make satisfied molds for customers.