Custom Special Engineering Plastic,special Engineering Plastic Manufacturers

Acrylic injection molding process Aug 11, 2021
Acrylic chemical named poly methyl methacrylate (PMMA). Because PMMA surface hardness is not high, easy to wipe hair, low impact resistance, molding flow performance and other shortcomings, PMMA modification has appeared. Such as methyl methacrylate and styrene, butadiene copolymerization, PMMA and PC blend, etc. The flow generation ratio of PMMA is lower than PS and ABS, and the melt vi...
- PMMA injection molding
- injection molding
- PLASTIC MOLD
Injection mold maintenance skills Aug 11, 2021
In order to determine the mold damage state and repair measures. Processing enterprises should be in the injection molding machine, under the normal operation of the mold, test the performance of the mold, and the final molded plastic parts size measurement, through these information can determine the existing state of the mold, find out the cavity, core, cooling system and parting surface da...
- hot runner mold
- mould ejection
- molded plastic parts
Application of new hot runner flow regulating system technology Aug 17, 2021
Application of new hot runner flow regulating system technology I. Traditional issues: There are some problems in the traditional production mode of centrifugal vane, such as serious material waste inrunner, low qualified rate of products and poor dynamic balance of products. · The use of pin gate cold runner to feedplastic produces more waste and serious waste of raw materials; · The pr...
- plastic mold
- mold factory
- hot runner mold
Automobile headlight decorative frame (Main Bezel) mold technology summary Aug 18, 2021
Automobile headlight decorative frame is one of the most important parts on the headlight, the appearance requirements are strict, the mold needs electroplating treatment. For the automobile headlight decorative frame mold, the design should pay attention to the following points: (1) Electroplating parts first to avoid welding lines, because electroplating parts have any welding lines will ap...
- Automobile headlight mold
- frame mold
- plastic part molding
What is the use of a lateral demoulding mechanism in a mold? Sep 10, 2021
Injection parts need to overcome the friction between parts and mold, to overcome atmospheric pressure (some semi-closed shell, cylinder parts), but also overcome the friction between the mold mechanism itself. Therefore, in order to overcome the demoulding force and ensure the stable work of injection mold, many exquisite demoulding mechanisms were born. These mechanisms can be divided ...
- injection parts
- plastic injection mold
- thread demoulding

1 ... 19 20 21

A total of 21 pages

Categories

Blog

New Blog

Tags

Search